Metal Brite is specially formulated to clean large aluminum surfaces such as trailers, aluminum buses, aluminum tankers and other aluminum equipment.

Metal Brite is free of hydrofluoric acid known to quickly etch aluminum. It uses a mix of acids specially blended to remove oxidation build up and corrosion from aluminum.

Metal Brite Uses/Benefits

• Removes corrosion & oxidation from aluminum surfaces with no brushing
• Removes soot and build up with no scrubbing
• High foaming formula for
• Concentrated liquid cleaner
• Cleans & brightens aluminum
• Non abrasive
• Removes aluminum welding soot

Directions for Use

BRUSH APPLICATION:

Dilute 1 part with as much as 40 parts water (depending on surface to be cleaned.) Adjust for best results. Apply to a section of the surface to be cleaned with a soft bristle brush, starting at the bottom, working up.

Allow 3 to 4 minutes to react with the corrosion and oxidation, then scrub briskly with the application brush and rinse thoroughly with water.

FOR SPRAY OR FOAMING APPLICATION: (Foam the product for best results . Foaming equipment options are here)
Using the same dilution ratio as in the brush application, spray onto the surface to be cleaned using a fan shaped spray, starting at the bottom and working up. Allow 3 to 4 minutes reaction time and rinse with water under pressure from top down.

The mist should not be allowed to drift away from the work area. DO NOT USE on aluminum buildings or aircraft, or on polished aluminum. Safe on glass. Freezing will not harm this product. Simply warm to room temperature and stir thoroughly.

Download SDS

Before & After Aluminum Cleaning Photos

Metal Brite Application in a Foaming Cart