North Woods® Solar Diamond is an advanced optical floor coating. Do not get this product confused with a floor finish, however an engineered optical polymer system. Solar Diamond is formulated with expanded solids that compacts the amount of solids to provide greater coverage and gloss with each coat. It utilizes the entire light spectrum to produce rich, deep, dazzling gloss that will never yellow.

Solar Diamond Uses/Benefits:

• Crystal clear polymers - No Yellowing!
• Cost effective
• Maximum performance

Directions for Use:

Solar Diamond technologically advanced optical floor coating was designed for total perfection in a high or low speed floor care program. It also works extremely well utilizing the wear and recoat system. For maximum benefits instructions for use and application should be followed explicitly.

1. Completely strip all of wax or finish. (For extra labor savings use North Woods® Bare Bones.)
2. If applying over old finish, be sure that all soils are removed or they will lock in.
3. When stripping, make sure all stripping solution has been removed and if not Bare Bones - rinsed as well.
4. Apply finish in a uniform, thin coat and allow to dry 20 - 25 minutes between application times. A minimum of two coats must be applied.
5. For routine cleaning, mop or auto scrub with Blue Ox cleaner.
6. Maintain by burnishing with propane or other high speed equipment, with Solar Burst Floor Reconditioner or Solar Shine Spray Buff.
7. Top scrub with North Woods® Power Scrub and recoat as needed.