North Woods® Titanium is the ultimate high gloss, extremely durable, extra long wear, and low maintenance floor finish. Titanium is perfect for facilities that need high quality floors, yet do not have the time for traditional means.

Titanium Uses/Benefits:

• Superior wearing and non-scuffing
• Self-leveling, self-sealing
• No buffing
• Extreme durability

Directions for Use:

Read the entire label before using this product. Recommended for use on all types of resilient tile (vinyl composition, vinyl, linoleum) and properly sealed hard surfaces (marble or terrazzo).

Restorative Maintenance:

Completely remove all old wax, finish and soil from floor surface following strip procedure instructions on Bare Bones label. Floor surface must be clean, dry and free of residue before finish is applied. Rinse with clean water if necessary. Apply finish in uniform, thin to medium coats using a clean synthetic finish mop or applicator system. Allow each coat to dry thoroughly before applying additional coats, usually 20 - 30 minutes. Elevated temperatures and humidity may extend dry time. For finish, 4-5 coats are recommended. Note: This product is a self sealing finish, however, if tile is old, worn, or porous, initially applying 1 - 2 coats of Bedrock will enhance gloss and long term performance.

Routine Maintenance:

Sweep large debris and dust mop (using a water based treatment). Damp mop or automatic scrub using Blue Ox. Buff or burnish the floor and extend the time between top scrub and recoating.

Interim Maintenance:

Sweep large debris and dust mop (using a water based treatment). Top scrub the floor using Power Scrub and recommended floor pad to remove the top soiled